Galvanized Steel Double Wall Outdoor Telecom Cabinet For Electronic Equipment And Batteries
1. Cabinet Instructions
This series outdoor cabinet is mainly used in wireless communication base station, such as communication/network integrated service, access/transmission switching station, emergency communication/transmission, etc.
This series outdoor cabinet is 2000mm High and 900mm Wide and 800mm Deep. For those who need more than just standard cabinet, this series can also offer a truly the security of customized solution with lots of available options, providing a climate-controlled environment for any electronic equipment, electrical load panels and cable entry solutions. It provides a secure,climate controlled environment for any electronic equipment.
2. Cabinet Parameters
| Configuration | Item | Technical Parameter |
| Cabinet Body | Size | External Size: 2000mm×900mm×800mm(H×W×D) |
| Component | The whole cabinet is composed of two parts: the upper part is used for installing electronic equipment,16U, and the lower part is used for installing batteries. The installation method is floor mounted. |
| Material | Galvanized steel, single wall,1.5mm thick,without heat insulation |
| Structure | - Single wall, galvanized steel,1.5mm thick
- One front door and one back door ,hidden zinc alloy hinge
- Outdoor special steel lock, lock cylinder assembled with protective cover, lock body assembled with three-point lock device
- Door stopper / wind lock is installed on the inside of the cabinet door
- Grooved door with seal rubber strip, attached to the inner side of the door, waterproof and dustproof
- Cable inlets at the bottom of cabinet
|
| Surface Treatment | Deoil, acid pickling, phosphating, electrostatic spraying, high temperature solidification |
| Color | Outdoor polyester light grey RAL 7035 coating or custom made |
| Ingress Protection | IP55 |
| Working Temperature | -40°C～+75°C |
| Cooling Method | Compressor Air Conditioner | 800W cooling capacity,220VAC |
| Monitoring | Monitoring Unit | 1U,19” racking mount |
| Smoke Sensor | 1pc, Monitor the smoke status inside the cabinet and provide real time alarm. |
| Door Sensor | 2pcs, When unlawfully opened, provide real-time alarm. |
| Temperature Sensor | 2pcs, used to detect the temperature inside the cabinet and send an alarm. |
| PDU | PDU | DC circuit breaker: 5x16A,5x10A; 1x MCB 4P 63A,4xMCB 2P 16A AC circuit breaker: 1x MCB 4P 63A,4xMCB 2P 16A |
| Illumination | Illumination | LED light, 1 pc,48VDC |
3. Cooling System
There is one air conditioner installed on the door of the cabinet.
4. Power Distribution Unit
DC circuit breaker:
5x16A,5x10A; 1x MCB 4P 63A,4xMCB 2P 16A
AC circuit breaker:
1x MCB 4P 63A,4xMCB 2P 16A
5.Cabinet Door And Lock
The cabinet door uses embedded structure.
The door opening angle is larger than 110°and the door limit device can limit the opening angle.
The lock is theftproof three point lock, supporting padlock.
6. Related Products
7.Factory Introduction
Factory Size: 3000 Square Meters
No. of Main Production Lines: 5
Contract Manufacturing: OEM Service Offered, Design Service Offered, Buyer Label Offered
Production Experience: 13 Year
