Cabinet type:one compartment.
Cabinet dimensions:800mm×700mm×1200mm(H×W×D)
19” mounting rack inside the cabinet
Door type:one front door,with three-point lock(padlock supported)
RAL7035 Gray color
Material:1.5mm thick galvanized steel, single wall, with 20mm PEF heat insulation
6 Cable Inlets are from the bottom of the cabinet.
Cooling system: 150W/K Heat Exchanger Cooling System
IP55 rated protection.
Floor mounting type
Package: wooden case

2. Product Configurations

Item	Product Name	Description	Qty	Unit
1	Telecom cabinet	Equipment cabint	1	SET
2	Heat exchanger	150W/K ,48VDC,installed on the top cover of the cabinet	1	SET
3.	Monitoring Unit	1U,RS485,SNMP,48VDC	1	SET
4	Smoke Sensor		1	PC
5	Vibration Sensor		1	PC
6	Water Sensor		1	PC
7	Door Sensor		1	PC
8	Temperature & Humidity Sensor		1	PC
9	LED light	48VDC,with access switch	2	PC
10	Wooden case	Wooden case	1	SET

3. Product Parameters

Configuration	Item	Technical Parameter
Cabinet Body	Model	131080712050003
	Size	External Size: 800mm×700mm×1200mm(H×W×D)
	Component	The whole cabinet is composed of two parts: The top part of the cabinet is 19”mounting rack. The lower part of the cabinet is one layer for battery. The installation method is floor mounted.
	Material	Galvanized steel, 1.5mm thick, insulation: 20mmPEF.
	Structure	Single wall, with insulation One front door,hidden zinc alloy hinge Outdoor special steel lock, lock cylinder assembled with protective cover, lock body assembled with three-point lock device Door stopper / wind lock is installed on the inside of the cabinet door Grooved door with seal rubber strip, attached to the inner side of the door, waterproof and dustproof The air inlet and air outlet are all installed with a filter, and the filter can be cleaned and replaced. Include standard 19“ rack inside the cabinet, high universality. Special rack or electrical lining board inside the cabinet can be custom made. Equipped with cable manager Cable inlets at the bottom of cabinet
	Surface Treatment	Deoil, acid pickling, phosphating, electrostatic spraying, high temperature solidification
	Color	Outdoor polyester light grey RAL 7035 coating or custom made
	Ingress Protection	IP55 or custom made
	Working Temperature	-40°C～+75°C
Cooling Method	Heat exchanger	150W/K,48VDC
Monitoring	Monitoring Unit	1U,RS485,SNMP,48VDC
	Smoke Sensor	1 pc
	Vibration Sensor	1pc
	Water Sensor	1pc
	Door Sensor	1pc
	Temperature & Humidity Sensor	1pc
Other	Illumination	LED light, 48VDC

4. Cooling System

150W/K heat exchanger,48VDC,which is installed on the top cover of the cabinet

5.Product Pictures

Product Tags:

industrial electric space heater

heat exchanger construction

construction of heat exchanger

Inquiry Cart 0