The cabinet is a single (galvanized and coated with polyester powder paint for ultimate protection) skinned outdoor enclosure for mounting on base assembly. It is designed with adapters to fit 19” equipment. The cabinet accommodates a dust and water protection rating of IP55. The cable entry is located at the bottom left of the cabinet by means of cable gland plates and cable tie brackets.
Thermal specification
Various options,
• Fan and filter
Fan with below fan specs
• Fan voltage 48Vdc
• Fan speed control Temp. Regulated
• Fans specification 48Vdc / 100W / IP44
• Fan can be mounted on the door or at cabinet top
Outdoor Cabinet for Solar Power Station, 19" 23U, IP55, Waterproof, Fan Cooling, Smoke Sensor, Door Switch, LED Lamp
Rail Specification
Construction: Galvanized Steel
Mounting: 19” mount – from top to bottom of the cabinet
Door Specification
Cabinet to have one front door
Cabinet Construction
Skin Material: 1.5mm (0.06”) thick electro-galvanized steel (corrosion-resistant)
Frame Material: galvanized steel
Powder-Coat Paint: outdoor polyester light gray RAL 7035 coating
The cabinet have a removable top. The purpose of this is for solar protection, hiding lifting ears and additional water protection.
Miscellaneous Specifications and Options
• Cable Entry: Bottom Cable Access
• Ground Bar
• Plinth Foot Print (154mm)
• Lifting Ears 4 lifting ears located under top cover
Other electrical devices
Service Light
The purpose of this kit is to get additional light inside the cabinet. Service Light is 48VDC.
Smoke Detector
A smoke detector is an optional device that detects smoke and issues an alarm to alert that there is a potential fire in the cabinet (Alarm should is normally open when triggered)
Door switch
This kit provides the cabinet with a door switch (Magnetic contact) that triggers alarm when the door is opened. (Alarm is normally open when triggered)
Cabinet Dimension
1300H x 720mmW x 720mmD
Pictures
