Remote Monitoring Environment / Security Monitoring System Support RS485 RS232

Quick Details:

Payment & Shipping Terms:

1. Description

The NEM-500 is a small high-reliability environment monitoring unit developed to provide environment/device control and remote monitoring for communications base stations, integrated equipment rooms, and out-door cabinets.

The monitoring unit monitors important environmental factors such as temperature, humidity, smog, water penetration, access control, vibration/leaning, main distribution frame (MDF), and surge protection device (SPD). When any value collected by a sensor exceeds the preset threshold, an alarm is sent through the LCD, buzzer, or system log.

The monitoring unit also provides complete device detection functions, such as switch power status detection. Through a preserved custom interface (optional), the unit can be connected to another sensor in main contact point output type.

2. Product Appearance

Chassis dimensions (H x W x D) are 43.6 mm (1U) x 482.6 mm (19 inches) x 122 mm. Front cabling is adopted. The following shows the front panel of the chassis:

Note: The diagram is for reference only and the dimensions may be different from those of the real device. Note: In this document, transmitter, sensor, and integrated transmitter have the same meaning.

Interface specifications

1.)Power switch

It is used to power on/off the device.

2.)Power interface

This device can be powered by AC or DC power supply.

AC voltage range: 85 VAC to 300 VAC;

DC voltage range: 20 VDC to 60 VDC

3.)Liquid crystal display (LCD)

It displays sensor status data and parameter configuration pages.

4.)Buttons

They are used together with the LCD for menu page up/down and parameter settings.

UP: — Go to the previous page up (when viewing), or increase the parameter value (when setting);

DOWN: — Go to the next page up (when viewing), or decrease the parameter value (when setting);

OK: — Confirm the selection of a menu option (when viewing), or of a parameter value (when setting).

5.)LEDs

They show the operation and alarm status of the monitoring unit.

Power LED: — It indicates that the device is powered on and running;

Minor alarm: — It indicates a minor alarm;

Major alarm: — It indicates a major alarm.

6.)Sensor input interfaces

Four current-type analog input ports, with 12 VDC power ports connected to temperature, or temperature and humidity combination sensors;

Eight switch (dry contact) input ports, three of which with 12 VDC power ports connected to access control, smog detector, infrared detector, or SPD sensors;

8.)Dry contact (relay) output interfaces

Eight ports are available to send alarm signals to the upper-level alarm center, or to control the device’s startup/close-down.

You can customize alarm rules, and associate any alarm signal with a relay among O1 to O8. Ports O1 to O4 output switch signals;

Ports O5 to O8 control large-current devices such as fans and heaters.

9.)RS485/RS232/Ethernet interfaces

Four ports: A is an optional Ethernet port; B and C are fixed RS485 ports; D is an RS485/RS232 multiplex port that can be set to work in either RS485 or RS232 mode. Port A, D can be switch by the system automatically.

Ports A and D are used to connect the remote computer or alarm center device;

Ports B and C are used to connect other RS485-interface devices, such as the switch power, air conditioners, heat exchangers, and temperature and humidity sensors. (Note: Transparent data transmission and forwarding are supported. The complete monitoring functionality is to be developed based on standard communications protocols.)

Configuration and cabling diagram:

Specifications of the Environment Monitoring System

3. Features

3.1 Front maintenance (front cabling): higher space utilization and easy maintenance

3.2 Combat structure: standard 1U/19-inch chassis for easy installation

3.3 Monitoring of cabinet switch power: The monitoring unit can be connected to the switch power for transparent data transmission and forwarding. The complete monitoring functionality is to be developed based on standard communications protocols.

3.4 Uploading over standard protocols: The monitoring unit uploads environment data to the monitoring background and receives remote system commands over specified protocols in main contact point or RS485/232/IP mode.

3.5 Complete monitoring functionality: The monitoring unit intelligently controls all environment devices in an equipment room, and automatically monitors environment parameters against the alarm thresholds from remote.

3.6 GUI-based host computer control software:

3.7 Various sensors supported: The monitoring unit can be connected to various analog-output sensors, switch-output sensors, and RS232, RS485 interface sensors.

3.8 Built-in common sensors for simplified cabling during monitoring system installation Optional built-in DC power failure sensor, AC power failure sensor, and water sensor

3.9 Flexible power supply mode: voltage range as 85 VAC to 300 VAC, or 20 VDC to 60 VDC

4. Product Specifications

Environment variables

Output ports

Communication ports

Four ports are configured as follows:

Note: Items 2 and 3 cannot coexist.